One installer for both Google Assistant and Amazon Alexa

Simultaneously run Google Assistant and Alexa on Raspberry Pi

 

For Google Assistant

1. Download credentials--->.json file (refer to this doc for creating credentials https://developers.google.com/assistant/sdk/develop/python/config-dev-project-and-account)
   
2. Place the .json file in/home/pi directory
   
3. DO NOT RENAME THE JSON FILE
   

For Amazon Alexa

1. Create a security profile for alexa-avs-sample-app if you already don't have one.
   https://github.com/alexa/avs-device-sdk/wiki/Create-Security-Profile

---

Setup Amazon Alexa, Google Assistant or Both

---

1. Clone the git using:

git clone https://github.com/shivasiddharth/Assistants-Pi  

2. Make the installers executable using:

sudo chmod +x /home/pi/Assistants-Pi/scripts/prep-system.sh    
sudo chmod +x /home/pi/Assistants-Pi/scripts/audio-test.sh   
sudo chmod +x /home/pi/Assistants-Pi/scripts/installer.sh  

3. Prepare the system for installing assistants by updating, upgrading and setting up audio using:

sudo /home/pi/Assistants-Pi/scripts/prep-system.sh

4. Restart the Pi using:

sudo reboot

5. Make sure that contents of asoundrc match the contents of asound.conf
   Open a terminal and type:

sudo nano /etc/asound.conf

Open a second terminal and type:

sudo nano ~/.asoundrc

If the contents of .asoundrc are not same as asound.conf, copy the contents from asound.conf to .asoundrc, save using ctrl+x and y

6. Test the audio setup using:

sudo /home/pi/Assistants-Pi/scripts/audio-test.sh  

7. Restart the Pi using:

sudo reboot

8. Install the assistant/assistants using the following. This is an interactive script, so just follow the onscreen instructions:

sudo /home/pi/Assistants-Pi/scripts/installer.sh  

9. After verification of the assistants, to make them auto start on boot:
   Pi 3 and Pi2 users, open the gassistpi-ok-google.service in the /home/pi/Assistants-Pi/systemd folder and add your project-id and model-id in the indicated points.

Pi Zero users, open the gassistpi-push-button.service in the /home/pi/Assistants-Pi/systemd folder and add your project-id and model-id in the indicated points.
After that, open a terminal and run the following commands:

sudo chmod +x /home/pi/Assistants-Pi/scripts/service-installer.sh
sudo /home/pi/Assistants-Pi/scripts/service-installer.sh  

#If using Pi 2B or Pi 3B
For Alexa:

sudo systemctl enable alexa.service  

For Google Assistant:

sudo systemctl enable gassistpi-ok-google.service  

#If using Pi zero
For Alexa:

sudo systemctl enable alexa.service  

For Google Assistant:

sudo systemctl enable gassistpi-push-button.service

10. Authorize Alexa before restarting

sudo /home/pi/Assistants-Pi/Alexa/startsample.sh  

Manually Start The Google Assistant

At any point of time, if you wish to manually start the assistant:
Ok-Google Hotword/Pi3/Pi2/Armv7 users
Open a terminal and execute the following:

/home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id 'replace this with the model id'

Pushbutton/Pi Zero/Pi B+ and other users
Open a terminal and execute the following:

/home/pi/env/bin/python -u /home/pi/GassistPi/src/pushbutton.py --project-id 'replace this with your project id'  --device-model-id 'replace this with the model id'

 

• Tweet
• Share
• Share
• Share
• Share